Overview
This optional adaptor is designed specifically for use with Rotax engines for hooking your CarbMate / SynchroMate to a 912 or 914 series Rotax Aircraft Engine.
The 2 x hoses are both 6 feet long.
The connection points to each carburetor are easily made at the crossover tube between the two intake manifolds (separating the carbs during synchronization).
When one side of the crossover tube is removed, you are left with a male elbow and a female hose.
The inside diameter of the hose is 11mm or 7/16”
This way, one carb is hooked to the CarbMate at the elbow on the intake manifold, and the other carb is hooked up at the hose on the compensating tube which is hooked to the other intake manifold.
|
These oil injection control cables are pre-assembled for use on Rotax 2 stroke engines that have oil injection pumps installed. They’re designed to work with our throttle control kits but can be purchased separately as a replacement or custom installation.
For 582UL and 618UL engines select cables with a 1/4″ swage, for 503UL engines select cables with a 5/16″ swage. |
| Q & A | Q: Does this unit work on a Rotax 582 without needing an adapter kit? Thanks It will work for a 582, but you'll have to remove the brass fittings from the black hoses. |
|---|---|
| Part # | 07-01889 |
| MFR Model# | TS-400 |
